Deutsch
English
SAN-MINI 1 µm Activated Carbon Filter – Replacement Cartridge
The SAN-MINI 1 µm Activated Carbon Filter is the replacement cartridge for the SAN-MINI under-sink water filtration system by SANSEI innovations.
Made from compressed activated carbon, it combines fine filtration down to 1 µm with the adsorption properties of activated carbon – all in one compact cartridge.
When the filter eventually needs replacing, the SAN-MINI itself stays exactly where it is. Simply replace the cartridge inside the existing 316 stainless-steel housing.
1 µm Filtration Meets Activated Carbon
The fine structure of the cartridge provides mechanical filtration down to its specified 1 µm rating, whilst the activated carbon can adsorb various organic substances from the drinking water.
The result is a straightforward combination of fine mechanical filtration and activated-carbon adsorption in a single replaceable filter cartridge.
Use It on Its Own – or Add Titanium
The cartridge can be used on its own as a 1 µm activated carbon filter, or combined with the separately available SAN-MINI 0.2 µm (200 nm) Titanium Filter Element.
The titanium element fits inside the activated carbon cartridge, adding a further stage of fine mechanical filtration without requiring a different SAN-MINI housing.
At a Glance
- Product: SAN-MINI replacement filter cartridge
- Filter medium: compressed activated carbon
- Filtration rating: 1 µm
- Filtration principle: fine mechanical filtration and adsorption
- Compatible with: SAN-MINI under-sink water filter
- Expandable: accepts the SAN-MINI 0.2 µm (200 nm) titanium filter element
- Purpose: replacement cartridge for routine filter changes
SAN-MINI 1 µm Activated Carbon Filter
Replacement Cartridge
CHF 48.–
Replace the filter. Not the filter system.
The stainless-steel SAN-MINI housing remains in service; only the
activated carbon cartridge is replaced when required. Rather more
sensible than throwing half the system away.
Want to know more about SAN-MINI and its different filtration options? Full details can be found on the official SANSEI innovations product page.
- Power connection
- 230V - 50Hz
- Power consumption
- 200W (in use)
- Pump
- Booster 900 GPD SHV 36V 8bar
- Flow rate
- 100–120 litres per hour at 25°C (1.66–2.00 litres/minute)
- Pre-filter
- 1 x activated carbon filter with silver ions 12x2.5";
- Membrane
- 2 x CSG-K filter membranes, 200 GDP
- Filter performance
- 95% - 98% of all substances
- Most important filtered substances
- Hormones, pesticides, nitrates, nitrites, drug residues, PFAS & TFAS, heavy metals, rust, chlorine, ammonia, microplastics and nanoplastics, microorganisms (such as bacteria, viruses, fungi, algae), fungicides, herbicides
- Wastewater ratio
- 1:1 (for one litre of pure water, one litre of waste water is generated)
- Pump start
- freely selectable, gradually increasing
- Regulation of total dissolved solids (TDS)
- freely adjustable
- Audible alarms
- Malfunction, filter replacement
- Display/control
- Malfunction, functions customisable and verifiable
- Dimensions (W x D x H) in cm
- Cooling unit: 44 x 38 x 11 - Filter unit: 39 x 31 x 11 - For installation, add 5 cm to the length
- Weight
- 25 kg
- Service (depending on water consumption and water quality)
- Approximately 5 years