Deutsch
English
SAN-MINI 0.2 µm Titanium Filter – Reusable Filter Cartridge
The SAN-MINI 0.2 µm Titanium Filter is a complete, stand-alone filter cartridge for the SAN-MINI under-sink water filtration system. With a filtration rating of 0.2 µm (200 nm), it provides exceptionally fine mechanical filtration of drinking water.
Important: this titanium filter is designed to be used on its own.
It fits directly into the SAN-MINI stainless-steel housing and
must not be combined with the activated carbon cartridge or
the separate titanium filter element.
If you would like activated carbon and titanium filtration together,
choose the SAN-MINI 1 µm Activated Carbon Filter
with the SAN-MINI 0.2 µm Titanium Filter Element instead.
0.2 µm. Purely Mechanical.
The SAN-MINI Titanium Filter works by mechanical fine filtration. Water passes through the fine titanium filter structure with a filtration rating of 0.2 µm – or 200 nanometres.
Unlike the activated carbon configuration, this version contains no activated carbon. It is the right choice when you want to use titanium filtration on its own inside your SAN-MINI.
Backwash. Clean. Reuse.
The titanium filter is designed to be used again and again. During normal operation, the SAN-MINI can be backwashed, helping to reduce the build-up of retained particles and extending the intervals between more thorough cleaning.
When required, the titanium cartridge can be removed, cleaned ultrasonically and fitted back into the housing. No routine replacement cartridge required simply because a calendar says so.
At a Glance
- Product: complete SAN-MINI titanium filter cartridge
- Material: titanium
- Filtration rating: 0.2 µm (200 nm)
- Filtration principle: mechanical fine filtration
- Installation: used on its own inside the SAN-MINI housing
- Combined with activated carbon: no
- Combined with titanium filter element: no
- Backwashable: yes
- Ultrasonic cleaning: yes
- Reusable: yes
- Compatible with: SAN-MINI under-sink water filter
SAN-MINI 0.2 µm Titanium Filter
Reusable Titanium Filter Cartridge
CHF 330.–
Which Titanium Option Do I Need?
Want titanium filtration on its own?
This is the one. The complete SAN-MINI 0.2 µm Titanium Filter
goes directly into the housing and is used entirely on its own.
Want activated carbon + titanium?
Then this is not the filter you need. Choose the
SAN-MINI 1 µm Activated Carbon Filter together with
the SAN-MINI 0.2 µm Titanium Filter Element.
Titanium. And nothing else.
0.2 µm mechanical fine filtration in a complete, backwashable and
reusable filter cartridge. No activated carbon. No additional filter
element. No unnecessary complication.
Not quite sure which SAN-MINI filter configuration is right for you? Compare activated carbon, titanium and the combined option on the official SANSEI innovations product page.
- Power connection
- 230V - 50Hz
- Power consumption
- 200W (in use)
- Pump
- Booster 900 GPD SHV 36V 8bar
- Flow rate
- 100–120 litres per hour at 25°C (1.66–2.00 litres/minute)
- Pre-filter
- 1 x activated carbon filter with silver ions 12x2.5";
- Membrane
- 2 x CSG-K filter membranes, 200 GDP
- Filter performance
- 95% - 98% of all substances
- Most important filtered substances
- Hormones, pesticides, nitrates, nitrites, drug residues, PFAS & TFAS, heavy metals, rust, chlorine, ammonia, microplastics and nanoplastics, microorganisms (such as bacteria, viruses, fungi, algae), fungicides, herbicides
- Wastewater ratio
- 1:1 (for one litre of pure water, one litre of waste water is generated)
- Pump start
- freely selectable, gradually increasing
- Regulation of total dissolved solids (TDS)
- freely adjustable
- Audible alarms
- Malfunction, filter replacement
- Display/control
- Malfunction, functions customisable and verifiable
- Dimensions (W x D x H) in cm
- Cooling unit: 44 x 38 x 11 - Filter unit: 39 x 31 x 11 - For installation, add 5 cm to the length
- Weight
- 25 kg
- Service (depending on water consumption and water quality)
- Approximately 5 years